\n The visual manifestation of silicon spots on the surface of clothing is the appearance of oil spots as small as a pin tip or as large as a rice grain. Under extreme conditions, the area may be larger. Sometimes the oil spots have a certain color due to floating color. The spots are like small wet spots. It feels soft and grain-free, and is extremely difficult to spot and remove before drying. \ufffd\u7a76\u5176\u56e0\u662f\u7845\u6cb9\u7834\u4e73\u6f02\u6cb9\u5bfc\u81f4\uff0c\u5e38\u51fa\u73b0\u5728\u514d\u70eb\u6574\u7406\u548c\u6c34\u6d17\u8fc7\u8f6f\u5de5\u827a\u540e\ufffd \ufffd<\/p<\/p>\n
\n When preparing non-iron lotions, in order to reduce the impact of resin finishing, silicone oil is often added to improve brightness, smoothness and tearing strength. Most of them are amino silicone oil, large breast type hydroxyl silicone oil or compound silicone oil softener. Now they are also starting to Applications of multi-component copolymerized silicone oil In addition to selecting the appropriate silicone oil when applying, be sure to follow the correct ingredient dilution process. Use it after 1-2 hours after preparation. Check the surface of the potion for floating objects and delamination before use. Also during the process of soaking clothing To check whether there is any change in the status of the medicine, it is recommended to use a medicine soaking machine or a medicine sprayer In addition to the structure, cationicity and emulsification level of silicone oil, the phenomenon of demulsification of floating oil is mainly caused by the anionicity of resin, strong electrolyte of catalyst, water hardness and clothing fabrics such as PH value and other factors that interfere with the residual liquid. Due to high temperature setting reasons, it is not necessary to After the ironing process is completed, the problem of silicon spots is found. There is currently no good way to eradicate it. It mainly depends on preliminary inspection and strict implementation of the process. \ufffd<\/p<\/p>\n
\n When water washing is too soft, due to the previous process environment, the fermentation washing process generally has fewer problems than the general washing process. General washing often uses alkali agents during desizing. Direct softening after insufficient removal of the alkali agent is prone to problems. Other processes If there is color registration, bleaching, and frying before softening, Processes such as frying and bleaching are caused by the use of strong electrolyte powder, coarse salt to promote dyeing or soda ash, caustic soda, and phosphate to fix the color, or the use of strong oxidants such as high manganese with phosphoric acid, hydrogen peroxide, bleaching water, or the use of pumice, fiber fragments, etc. Chips and other reasons may lead to the occurrence of silicon plaque. \ufffd\u5c31\u6b64\u800c\u8a00\uff0c\u6211\u4eec\u575a\u6301\u7684\u539f\u5219\u662f\uff1a\u52a0\u8f6f\u524d\u670d\u88c5\u8981\u5145\u5206\u7684\u6e05\u6c34\u8fc7\u5e72\u51c0\uff0c\u5fc5\u8981\u65f6\u52a0\u8f6f\u524d\u540e\u4e00\u9053\u8fc7\u6e05\u6c34\u52a0\u9002\u91cf\u918b\u9178\u6216\u6e17\u900f\u5242\uff08\u5de5\u5382\u67a7\u6cb9\u4e5f\u53ef\uff09\u8c03\u6574\ufffd In terms of operation: Do not turn on steam to heat up the water machine after adding silicone oil; the softening temperature should not exceed 60\u00b0C (for conventional silicone oil); do not add anionic additives such as anionic penetrants, chelating dispersants, etc.; try to avoid adding strong ones later. Electrolyte raw materials such as salt, soda ash, caustic soda, etc.; when adding silicone oil, the machine must be turned on; do not stop the machine after adding soft and draining the liquid. \ufffd<\/p<\/p>\n
\n \t\u8fd9\u91cc\u6709\u4e00\u4e2a\u5224\u65ad\u6c28\u57fa\u7845\u6cb9\u4e73\u5316\u662f\u5426\u5145\u5206\u7684\u76f4\u89c2\u529e\u6cd5\uff1a\u5c06\u7845\u6cb9\u7a00\u91ca5\u81f310\u500d\uff0c\u9759\u7f6e30\u5206\u949f\u540e\u89c2\u5bdf\u7a00\u91ca\u6db2\u8868\u9762\uff0c\u5982\u679c\u6709\u6f02\u6cb9\u6216\u62c9\u4e1d\u73b0\u8c61\uff0c\u5219\u6b64\u7845\u6cb9\u4f7f\u7528\u65f6\u8981\u5c0f\u5fc3\u8c28\u614e\u3002<\/p>\n
\n For the removal of silicon plaque, the current effective low-cost method is to spray the silicon plaque clothing part with gasoline, and then put the clothing in a sealed plastic bag or a closed bucket. There should be enough gasoline at the bottom of the bag or bucket. After leaving it for 20-60 minutes, take the garment out of the machine and wash it thoroughly with detergent. The silicon plaque removal effect is ideal, but there is a residual gasoline smell. You can use emulsified detergent to fully wash it to remove it, or you can cover up the fragrance smell. \ufffd\u6b64\u5916\uff0c\u5982\u679c\u662f\u542b\u6709\u6da4\u7eb6\u7ea4\u7ef4\u7684\u9762\u6599\u4e14\u672a\u7ecf\u6574\u70eb\uff0c\u53ef\u4f7f\u7528\u5f02\u4e19\u9187\u5145\u5206\u6d78\u6ce1\uff0c20-24\u5c0f\u65f6\u540e\u6e05\u6d17\u7684\u65b9\u6cd5\uff0c\u6b64\u6cd5\u5bf9\u6da4\u7eb6\u635f\u4f24\u5fae\u4e4e\u5176\u5fae\ufffd \ufffd\u7eaf\u68c9\u9762\u6599\u4e14\u672a\u7ecf\u6574\u70eb\uff0c\u4e5f\u53ef\u4f7f\u7528\u5f02\u4e19\u9187\u6d78\u6ce1\u6cd5\ufffd \ufffd\u56e0\u65f6\u95f4\u95ee\u9898\uff0c\u672a\u505a\u5176\u4ed6\u6eb6\u5242\u53bb\u9664\u8bd5\u9a8c\u6548\u679c\u8bc4\u4ef7\uff0c\u5f85\u5927\u5bb6\u5b9e\u8df5\ufffd <\/p>\n
Extended reading: https:\/\/www.tpu-ptfe.com\/post\/7.html<\/ a> The visual manifestation of silicon spots on the surface of clothing is the appearance of oil spots as small as a pin tip or as large as a rice grain. Under extreme conditions, the…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[46],"class_list":["post-8432","post","type-post","status-publish","format-standard","hentry","category-textile-fabric-news","tag-db"],"_links":{"self":[{"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=\/wp\/v2\/posts\/8432","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=8432"}],"version-history":[{"count":0,"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=\/wp\/v2\/posts\/8432\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=8432"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=8432"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.textile-fabric.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=8432"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Extended reading:https:\/\/www.alltextile.cn\/product\/product-40-726.html<\/a>
Extended reading: https:\/\/www.yingjietex.com\/product\/750D-Polyester-Three-Color-Double-Thread-OXFORD-Fabric.html<\/a>
Extended reading:https:\/\/www.tpu-ptfe.com\/post\/3314.html<\/a
Extended reading: https:\/\/www.alltextile.cn\/product\/product-22-328. htm<\/p>\n","protected":false},"excerpt":{"rendered":"