Textile Fabric News

Textile fabrics go through multiple processes during the production process. During this process, due to raw materials, production processes, Errors caused by various reasons such …

Many textile companies will encounter this problem: whether it is cylinder card clothing or flat card clothing, after combing pure cotton varieties for a period of time, there will…

Aurora (calendered, striped) ⑴Form: The cloth surface shows regular or irregular dots, strips or blocks of light. ⑵Cause: ① The pressing roller cloth is not wrapped flatly, the pre…

　Linen products are moisture-absorbing and breathable, comfortable and pleasant, naturally antibacterial, anti-radiation and non-static, green and environmentally friendly, and ben…

active color Analysis of common problems in green dyeing Reactive emerald blue and reactive bright yellow are dyed together. The dyeing is prone to three major quality problems: fi…

The printing fastness of nylon cloth is a problem that it often encounters, especially when printing with paint on waterproof nylon cloth, the fastness is always a technical proble…

Use ultraviolet fluorescent lamps to illuminate the fibers, and identify the fibers according to the different properties of the light emitted by the fibers and the different fluor…

Yarns spun through various new spinning methods, Its appearance and performance are different from traditional yarns. 1. Air-flow yarn Puffy appearance, wear-resistant, less hairin…

(1) The position of the rear beam (C28) is too low. After opening, the tension difference between the upper and lower warp yarns is too small. When the weft yarn shrinks, the warp …