Section 5 Models and main technical specifications of heald frames
Common heald frames and main technical specifications are shown in Table 5-7. Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:
Section 1 The function of the heald rod and the conditions it should meet
The draw-in rod is a key part of the heald frame, which connects the healds or steel healds through the draw-in rod. 1. The role of the draw-in rod in the weaving process The draw-…
Section 6 Manufacturers of loom heald frames
Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:
Ring spinning process and top equipment manufacturers
Ring spinning process: Blowing—carding—drawing—roving—spun yarn—winding 1. Blowroom 1. Tasks of the blowroom (also known as blowroom) machine: 1). Ope…
Section 3 Use of Heald Rods
1. Use of O-shaped heddle threading rods(1) O-shaped heddle threading rods are mainly used for closed heddles or healds. (2) The O-shaped heald rod is used in conjunction with the …
Section 2 Types and Technical Requirements of Heald Rods
1. Classification of heddle rods (1) Classification according to the cross-sectional shape of the heddle rods: O-shaped; J-shaped; C-shaped (see Figure 6-1). (2) Classification acc…
Section 4 Maintenance and Management of Heald Rods
1. Maintenance of the heald rods (1) Handle the heald frames and the heald rods that have been removed from the machine with care, and properly transport them back to the reed room…
广告
Section 5 Models, Technical Specifications and Manufacturers of Heald Rods
1. Models of heald penetration rods 1. Models of O-shaped heald penetration rods (1) Markings of A-shaped heald penetration rods Example: Suitable for closed O-shaped heddle ear he…
Section 5 Models and main technical specifications of steel healds
1. Models of steel sheet healds (1) C shape: Heald lug open type, single row is represented by C, double row is represented by CP; (2) J shape: Heald lug open type, single row It i…
Section 3 The use of steel healds
1. Selection of steel healds The length of the steel healds is related to the requirements of the warp opening. Long healds are used for large openings, and short healds are used f…